Samsung NE59J7630SS Service Manual page 13

3. Disassembly and Reassembly
3-3 Removing Surface elements and The Ceramic Glass Cooktop
Parts
Surface
elements
and
Ceramic
Glass
Cooktop
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 18.
- The others : M4 X 12.
Explanation Photo
13
Explanation
5. To remove the surface elements
a) Remove the wires from the
element and limiter terminals.
b) Remove the element bracket screw
(shown above) for the element you
are servicing.
c) Carefully lift the bottom of the
the element.
d) Use sharp tool to remove the
heating element.
REASSEMBLY NOTE: When you reinstall
the element make sure that the wires
are inserted onto the correct terminal
then reinstall the bracket screw to
secure it to the cooktop.