Samsung NE59J7630SS Service Manual page 49

4. Troubleshooting
4-2 Electrical Malfunction
(Continued)
RC radiant element
(No heating or
Abnormal working)
*Check element of RC radiant.
*Check whether harness connected
wire and the state of element of RC
radiant are in normal.
Ok
Assembly RC cooktop
"C" "C"
RC radiant element
*Check whether harness is connected with
warming zone relay on Main PCB has been
damaged or disconnected.
END
No
"D" "D"
"B" "B"
"A" "A"
Ok
Ok
END
Ok
*Tighten terminal of harness by
compressing not to be loosen.
Ok
*Check whether harness in
terminal of radiant has been
loosen or disconnected.
Ok
*Weld with terminal not to be misconnected
if harness is disconnected from terminal
on switch.
END
WARNING
It is very dangerous when radiant heater is
working in case that harness has misconnected.
Fig.14 RC radiant element
Position ohms
"A"-"B"
"C"-"D"
(at the room temperature)
Fig.15 The drawer of connected wire of harness
Position
"A" violet (red)
"B" red (violet)
"C"
"D"
49
Color
yellow
yellow