4. Troubleshooting
4. Troubleshooting
4-1 Information Display Codes
Possible check codes during use can be checked before service.
1. Press 'Clock' pad.
2. Press a number
3. Press the 'START/SET' pad.
4. Press 'Clock' and number '1' pads at the same time for 3 seconds.
Check codes are displayed.
5. Press number '0' pad, the latest 4 check codes can be checked. But,
if the oven turns off, the stored check codes are deleted.
6. Press 'OFF/CLEAR' pad to return to normal display mode.
Check code
Displayed code
C-20
pad.
CAUSE
oven sensor opened
Oven sensor shorted.
1. Disconnect power. Open the back cover.
Disconnect sensor harness from control
Measure sensor resistance
sensor.
2. If there is not any problem with oven sensor,
Please check whether there is a damaged
terminal or wire on harness.
3. Check resistance of oven sensor connector on
28
SOLUTION