Advanced Z-Wave Settings - Trane ComfortLink II XL1050 Manual

Navigate to Advanced Z-Wave Settings Screen by selecting: Home Screen > Menu > Smart Home > Advanced
The ADVANCED SETTINGS screen contains three
very powerful functions. Each of these functions
is very specific and should be approached with a
measure of caution.
Learn
To add the bridge to an existing network, follow
your primary controller's instructions to put the
primary controller into Add Mode. Then select
the Learn button on the bridge.
This function copies a new Z-Wave network to the
bridge from another controller. This function is
not allowed if your bridge is a primary controller
with included Z-Wave devices.
Unregister
Removes the bridge from Trane Home. All remote
control features will be disabled.
Factory Reset
Resets all Z-Wave information and removes
all devices from the bridge. If this bridge is the
primary controller for your network, resetting it
will result in all the devices in your network being
removed. Following the reset, it will be necessary
to remove and then add all of the devices back to
your network.
32-5093-04B-EN

Advanced Z-Wave Settings

Bridge Information
If this bridge is being used as a secondary or
inclusion controller in the network, please reset
this bridge only in the event that the primary
controller is missing or otherwise inoperable.
page 29