Connecting The Projector; Terminals Of The Projector - Canon LV-X2 Owner's Manual

CONNECTING THE PROJECTOR

This projector has input and output terminals on its side for connecting computer and video equipment. Refer to figures on
pages 11 to 13 for these connections.
USB CONNECTOR (Series B)
When controlling a computer
with the optional Wireless
Remote Control Unit, connect
the USB port of the computer to
this connector. The Remote
Control Unit supplied with the
projector can not control a
computer. Consult your dealer
for details. (Refer to P12.)
COMPUTER AUDIO
INPUT JACK
Connect the audio output
(stereo) from
computer to this jack.
(Refer to P12.)

TERMINALS OF THE PROJECTOR

RESET BUTTON
The projector uses a micro
processor for control and
occasionally, need to be reset.
This can be done by pressing
the RESET button with a pen,
which will shut down and
restart the unit. Do not use
the RESET
excessively.
VIDEO IN
Y –– Pb / Cb –– Pr / Cr
RESET
COMPUTER
AUDIO IN
CONTROL
AV AUDIO IN
RGB IN
AUDIO OUT
AUDIO OUTPUT JACK
Connect an external
audio amplifier to this
jack.
the
(Refer to P12, 13.)
VIDEO INPUT JACKS
Connect the composite video
output from your video
equipment to VIDEO/Y jack
or connect the component
video outputs to VIDEO/Y,
Pb/Cb and Pr/Cr jacks.
(Refer to P13.)
function
S–VIDEO IN
AUDIO INPUT JACK
Connect the audio output
from your
equipment to this jack.
(Refer to P13.)
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from your
video equipment to
this jack.
(Refer to P13.)
CONTROL PORT CONNECTOR
When controlling a computer
with the optional Wireless
Remote Control Unit, connect
the mouse port
computer to this connector.
The Remote Control Unit
supplied with the projector can
not control a computer.
Consult your dealer for details.
(Refer to P12.)
RGB INPUT
TERMINAL (ANALOG)
Connect the computer
output to this jack.
(Refer to P12.)
video
of the
11