Before Operation; Operation Of The Remote Control Unit14 - Canon LV-X2 Owner's Manual

BEFORE OPERATION

OPERATION OF THE REMOTE CONTROL UNIT
Infrared signals transmitted from this point.
INPUT BUTTON
Used to select input source.
(P22, 30)
VOLUME BUTTONS
Used to adjust volume.
(P21)
MUTE BUTTON
Used to mute sound.(P21)
POINT BUTTONS
Used to move the pointer on
the MENU, to adjust the
item, or to pan the image in
DIGITAL ZOOM mode.
(P29)
NO SHOW BUTTON
Used to turn the picture into
black image. (P21)
FREEZE BUTTON
Used to freeze the picture.
(P20)
P-TIMER BUTTON
Used to operate P-TIMER
function. (P21)
To insure safe operation, please observe the following
precautions :
G Do not bend, drop Remote Control Unit, or expose
Remote Control Unit to moisture or heat.
G For cleaning, use soft dry cloth. Do not apply
benzene, thinner, splay or any chemical material.
14
INPUT POWER
+
W
KEY
VOL D ZOOM
MUTE
STONE
–
T
MENU
SET
AUTO
NO SHOW IMAGE
PC ADJ.
FREEZE P-TIMER
POWER ON-OFF BUTTON
Used to turn the projector
on or off. (P19)
D.ZOOM BUTTONS
Used to select DIGITAL
ZOOM mode and resize the
image. (P29)
KEYSTONE BUTTONS
Used to correct the
keystone distortion.
(P20, 35)
MENU BUTTON
Used to select MENU
operation. (P17, 18)
SET BUTTON
Used to execute the item
selected or to expand /
compress the image in
DIGITAL ZOOM mode.
(P29)
IMAGE BUTTON
Used to select image level.
(P27, 32)
AUTO PC ADJ. BUTTON
Use to operate Auto PC
Adjustment function. (P24)
Battery is installed in Remote
Control Unit.
Before operation, pull out and
remove a protect sheet from
Remote Control Unit. This sheet
protecting discharge of a battery.
FREEZE P-TIMER
Pull and remove.
BATTERY PROTECT SHEET
(transparent sheet)