Positioning The Projector; Adjustable Feet - Canon LV-X2 Owner's Manual

G This projector is designed to project on a flat projection surface.
G The projector can be focused from 3.6'(1.1m) ~ 26.2'(8m).
G Refer to the figure below to adjust a screen size.
Screen Size
(W x H) mm
Zoom (min)
Zoom (max)
✽ The projection maximum screen size is 200".
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted to approx.
10 degrees.
1 Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of a projector.
2 Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to
adjust position and tilt.
3 To retract the ADJUSTABLE FEET, lift the front of the
projector and pull the FEET LOCK LATCHES and push to
feet upward.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.)
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.

POSITIONING THE PROJECTOR

13.1'(4.0m)
9.2'(2.8m)
3.6'(1.1m)
100"
39"
70"
29"
29" 50"
589 x 442 1016 x 762
3.6' (1.1m) 6.6' (2.0m)
––––– 4.6' (1.4m)

ADJUSTABLE FEET

ROOM LIGHT
The brightness of a room has a great impact on
picture quality. It is recommended to limit
ambient lighting to provide the best image.
26.2'(8.0m)
18.7'(5.7m)
200"
140"
143"
100"
100" 150"
2032 x 1524 3048 x 2286
13.1' (4.0m) 19.7' (6.0m)
9.2' (2.8m) 14.1' (4.3m)
ADJUSTABLE FEET
PREPARATION
280"
Max. Zoom
200"
Min. Zoom
H1
H2
200"
4064 x 3048
26.2' (8.0m)
18.7' (5.7m)
FEET LOCK
LATCHES
9