Daikin FTXM09VVJU Operation Manual page 32

Hide thumbs Also See for FTXM09VVJU:
Table of Contents

Advertisement

TIMER Operation
WEEKLY TIMER Operation
NOTE
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller first.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with the WEEKLY TIMER.
When set to ON TIMER mode, operation will begin in the settings used previously for operation mode, temperature, airflow rate, and airflow direction.
• WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set while
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and " 
OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Turning off the circuit breaker, power failure, and other similar events will render operation of the indoor unit's internal clock inaccurate. Reset the clock.
can be used only for the time and temperature settings. It cannot be used to go back to the reservation number.
31
6.
Press
to select the desired time.
• The time can be set between 0:00 and 23:50 in 10-minute intervals.
• To return to the ON/OFF TIMER mode setting, press
9
• Proceed to STEP 
7.
Press
• The time will be set.
• " 
 " and the temperature blink.
8.
Press
to select the desired temperature.
• The temperature can be set between 50°F (10.0°C) and 90°F (32.0°C).
COOL or AUTO: The unit operates at 64°F (18.0°C) even if it is set at 50°F (10.0°C) to
63°F (17.0°C).
HEAT or AUTO : The unit operates at 86°F (30.0°C) even if it is set at 87°F (31.0°C) to
90°F (32.0°C).
• To return to the time setting, press
• The set temperature is only displayed when the mode setting is on.
9.
Press
• Check for a receiving tone and that the OPERATION lamp blinks twice.
• The TIMER lamp lights orange.
• Temperature and time are set in the case of ON TIMER operation, and the time is set in
the case of OFF TIMER operation.
• The next reservation screen will appear.
• To continue further settings, repeat the procedure from STEP
Display
10.
Press
to complete the setting.
• " 
 " is displayed on the LCD and WEEKLY TIMER operation is activated.
• A reservation made once can be easily copied and the same settings used for another
day of the week. Refer to Copy mode .
Page 11
when setting the OFF TIMER.
.
Page 14
Page 14
.
.
Page 32
 " will disappear from the LCD. When the ON/
.
4
.
Page 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftxm12vvjuFtxm18vvjuFtxm24vvju

Table of Contents