Daikin FTXM09VVJU Operation Manual page 15

NOTE
Note on changing the temperature setting
• In order to lower the humidity, the airflow rate during the DRY operation is automatically controlled.
Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
• Recommended temperature setting
− For cooling: 78-82°F (26.0-28.0°C)
− For heating: 68-75°F (20.0-24.0°C)
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling (heating) effect.
Keep the air filters clean.
• Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit breaker.
• The air conditioner always consumes a small amount of electricity even while it is not operating.
To change the temperature setting
Press .
• Press to raise the temperature and press
Each pressing of the button changes the temperature by 1°F (0.5°C).
COOL HEAT
operation operation
64-90°F 50-86°F
(18.0-32.0°C) (10.0-30.0°C)
*1 STD (Standard).... Indoor temperature at the time when the DRY operation is started.
*2 STD (Standard).... "
Dry (Dehumidifying)
To use Dry (Dehumidifying) mode
Press and select DRY operation mode.
• " " , " STD " is displayed on the LCD.
• DRY operation starts.
• Press to raise the temperature and press
with each press.
• This mode mixes dehumidified cool air with room air to adjust the air outlet temperature and
remove moisture.
• When the indoor temperature rises, COOL operation automatically starts.
• When the outdoor temperature is lower than the indoor temperature, dehumidifying is less effective.
to lower the temperature.
AUTO
operation
64-86°F "STD~(STD−5°F)"
(18.0-30.0°C) ("STD~(STD−3.0°C)")
, STD " is displayed on the LCD.
Basic Operation
DRY FAN
operation operation
The temperature setting
*1, *2
cannot be changed.
to lower the temperature by 1°F (0.5°C)
Page 40
14