Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
ITEM
Engine speed
Water pump rpm
Vacuum pump rpm
Water flow rate
Water pump pressure (low pressure)
Water pump pressure (high pressure)
Vacuum relief valve
Waste tank capacity
Console weight
Console weight (with waste tank & waste tank
accessories)
TORQUE VALUES
Engine hub
Vacuum pump hub
Water pump shaft bolt
JET SIZING:
Recommended floor tool tip sizing not exceed a total of ".06". Using larger jet sizes on your cleaning unit may
reduce cleaning temperatures.
Example:
Tri-jet wand uses three 9502 jets (95° spray angle w/ 02 orifice).
02 x 3 = 06
When using two floor tools while cleaning with this unit, it is recommended that each tool tip size does not exceed
a total of ".045".
Example:
Tri-jet wand uses three 95015 jets (95° spray angle w/ 015 orifice).
015 x 3 = 045..........06 x 2 tools = 12
Upholstery tool jet size:
Stair tool jet size:
DIMENSION/CAPACITY
2200 rpm (medium speed) Water Pump ON
900 rpm (idle speed) Water Pump OFF.
1455 rpm
3400 rpm
4.5 GPM (maximum)
1000 PSI (maximum)
3000 PSI (maximum)
13" Hg
80 or 100 gallons
860 lbs.
1110 lbs (1840 lbs. If waste tank is full)
480 inch lbs
192 inch/lbs
300 in//lbs
80015
9502
EVEREST EFI 980197 06/30/04
OPERATIONS
40 foot/lbs
16 foot/lbs
25 foot/lbs
3-1
Advertisement
Table of Contents
