Video Input; Input Source Selection - Canon LV-S4 Owner's Manual

Video Input

Input Source Selection

Direct Operation
Select either Video or Computer by pressing the INPUT button on
the top control or VIDEO or COMPUTER button on the remote
control unit.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Input Menu icon.
2 Press the Point
Video or Computer and then press the OK button. The
Source Select Menu will appear. When you select Video,
video input is selected. When you select Computer, move
the pointer to the correct input source and then press the OK
button.
When the input source is connected to the
S-Video
COMPUTER / S-VIDEO / COMPONENT IN with
a S-Video-VGA Cable, select S-Video.
When the input source is coming from video
Component
equipment connected to the COMPUTER / S-
VIDEO / COMPONENT IN with a Component-
VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER / S-
VIDEO / COMPONENT IN with a Scart-VGA
Cable, select RGB (Scart).
✔
Note:
• S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally
supplied. See page 57 for order.
32
7 8 buttons to move the red frame
d d button to move the red arrow pointer to
Top Control
VOL
MENU INPUT
+
Remote Control Unit
INPUT INPUT POWER POWER
COMPUTER OMPUTER VIDEO
VOL - VOL +
MENU MENU
Input Menu icon
KEYSTONE IMAGE NO SHOW
Input Menu
FREEZE AUTO PC P - TIMER
D.ZOOM
Move the pointer (red arrow)
MUTE
to Computer and press the
OK button.
Computer
Source Select Menu
Move the pointer to S-Video,
Component or RGB (Scart)
and press the OK button.
INPUT button
Computer
Video
COMPUTER
button
VIDEO
button