Canon LV-S4 Owner's Manual page 28

Computer Input
Display area
Press the OK button to display the Display area dialog box. Select
the resolution at the Display area dialog box.
Display area H
Adjust the horizontal area displayed by this projector. Press the
Point 7 8 buttons to decrease/increase the value and then press
the OK button.
Display area V
Adjust the vertical area displayed by this projector. Press the Point
buttons to decrease/increase the value and then press the OK
7 8
button.
Full screen
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Reset
To reset the adjusted data, select Reset and press the OK button.
The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Mode free
To clear adjusted data previously set, move the red frame pointer
to the Mode free icon and then press the OK button. Move the
red arrow pointer to the Mode that you want to clear and then
press the OK button.
Store
To store adjusted data, move the red frame pointer to the Store
icon and then press the OK button. Move the red arrow pointer to
any of Mode 1 to 5 in which you want to store and then press the
OK button.
Quit
Exit the PC Adjustment Menu.
✔
Note:
• Auto PC Adj., Display area, Display area (H/V), and Full screen cannot be selected
when "480i", "575i", "480p", "575p", "720p", "1035i", or "1080i" is selected in
the Computer System Menu (p25).
28
Press the OK button at the
Display area icon and the
Display
appears.
To store adjusted data
This Mode has parameters being stored.
Vacant Mode
Show values of "Total
dots," "Horizontal,"
"Vertical," "Display area
H," and "Display area V."
To clear adjusted data
Close this dialog box.
area dialog box
Display area