Checking Supplied Items - Sony CPF-NW001 Operating Instructions Manual

Checking Supplied Items

Main unit (See page 2 for compatible "Walkman"
models.)
LINE IN cable
Preparing the remote
Pull out the insulating sheet to allow power to
flow from the battery.
The remote already contains a battery.
To replace the battery, follow the instructions
below.
1
Slide out and remove the battery case.
2
Insert a new lithium battery with the + side
facing up.
CR2025 lithium battery
3
Slide the battery case back in.
Subwoofer
* The shape of the plug differs depending on the area.
Remote
Note
If you do not use the remote for a long period of time,
remove the battery to avoid possible damage from
battery leakage and corrosion.
Notes on lithium battery
• Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Tip
When the remote can no longer operate the system,
replace the battery with a new one.
WARNING
Battery may explode if you mistreated.
Do not recharge, disassemble or dispose of in fire.
GB
*
GB
3