Inserting Batteries - B+B Sensors IR 8895 Operation Manual

Operation manual
Infrared-thermometer IR 8895
5.2

Inserting batteries

Before operating the instrument for the first time, insert two new 1.5 V-Batteries type Mignon AA. Instructions on inserting batteries have
been described in detail in the section „Maintenance and cleaning".
5.3 Laser beam activation/de-activation
For a confidence of having done an exact measurement, the infrared thermometer 8895 is provided with a red point laser. This laser beam
approximately shows the centre of the measuring spot. To activate the laser beam press and hold the Trigger and press the laser On/Off
key [D]. The symbol „Laser beam active" appears on the screen as a confirmation of activation [5]. For deactivation, repeat the above
procedure. The symbol „Laser beam active" disappears from the display.
Technical changes reserved
0141 0316-190 30.11.2021
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 8316-50 | info@bb-sensors.com | bb-sensors.com
1 °C-Display
2 °F-Display
3 Temperature measurement display
4 Emission degree display
5 Laser beam active status display
6 Emission Symbol
7 Low-Battery display
8 Data-Hold display
A °C / °F Changeover key
• changeover between °C and °F
• reduce no of digits
B Background illumination key
• On/Off for the light
• increase no of digits
C Mode/Save-key
• activate emission input
• confirm emission input
D Laser ON/Off key
• Activate and de-activate the laser
E Activation key (Trigger)
• activate the measuring function
6 / 12