Table of Contents
Advertisement
Operation manual
Infrared-thermometer IR 8895
1
General description
The infrared thermometer 8895 is a measuring instrument for contact less temperature measurement. This thermal measurement principle is
ideally suitable for moving parts, electrically live parts, poisonous and sterile objects, where a conventional contact temperature measurement
method is not possible. The special features of the device are its fast response time and high temperature measuring range.
The aiming laser gun provided in the device shows the centre of the measuring object and simplifies measurements in case of distant objects.
The accurate optics has an aperture ratio of 12:1.
The Data-Hold function enables short-term storage of measured values. In addition, the device is also provided with °C/°F-conversion.
With the adjustable emission level, the optical characteristics of the measured object are taken into account and exact results of measurement
are also achieved for critical materials.
The robust, handy pistol casing and big LC display with illuminated background offer optimal ergonomics with simplest usage.
2
Dangers and precautions
The guarantee claim becomes void in case of damages caused due to non-compliance to the instructions! We take no liability for the
consequential damages which result from such negligence.
This appliance is with CE-conformance and fulfils the necessary guidelines. As per safety and acceptance standards (CE), re-engineering
!
or alteration of the device is not allowed.
In order to ensure a reliable operation of the device, the safety instructions, warnings and instructions provided in chapter on „Application
purpose" shall be necessarily followed!
2.1
General safety instructions
The guarantee claim becomes void in case of damages caused due to non-compliance to the instructions! We take no liability for the
!
consequential damages which result from such negligence.
This appliance is with CE-conformance and fulfils the necessary guidelines. As per safety and acceptance standards (CE), re-engineering
or alteration of the device is not allowed.
In order to ensure a reliable operation of the device, the safety instructions, warnings and instructions provided in chapter on „Application
purpose" shall be necessarily followed!
2.2
Product-specific safety instructions
Das Messgerät eignet sich aufgrund der berührungslosen Messverfahrens ideal zur Messung an kritischen Stellen, zum Beispiel an:
!
•
Rotating shafts or moving work pieces
•
Very hot or very cold objects
•
Electrical parts under energised condition
•
Unhealthy, poisonous or sterile materials
In should be noted that in the vicinity of such measuring points, often high hazard potential exists for the user or any third person. Hence, it
is necessary to exhibit a sensible behaviour and be more cautious. The relevant safety regulations shall be dully followed.
2.3
Precautions for Laser beam
Never focus the laser beam directly or indirectly (e.g. through reflective surfaces) on the eyes of human beings or animals. Laser radiation
!
can cause permanent damage to the eyes. The laser beam must be de-activated during measurements near creatures. The instrument
should not be used by children.
Technical changes reserved
0141 0316-190 30.11.2021
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 8316-50 | info@bb-sensors.com | bb-sensors.com
4 / 12
Advertisement
Table of Contents
