Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SATO SK-810PT
Summary of Contents for SATO SK-810PT
- Page 1 Instruction Manual Precision Digital Thermometer Model SK-810PT O.09...
- Page 2 - Do not use this unit as a clinical thermometer. - This SK-810PT is a precision instrument. Do not drop this unit or apply impact to it. - Never disassemble or modify this unit. Doing so may result in failure.
- Page 3 1. Overview SK-810PT is a precision digital thermometer that uses a platinum resistance temperature detector as the sensing element. It displays readings with a high resolution of 0.01°C throughout the measurement range of -100 to +360°C, and provides highly accurate measurement with a maximum system accuracy of ±0.16°C.
- Page 4 4. Names of Section ( Main housing) ■ Front view and Rear view ① Sensor connector ② Hook for mount Display section Key operation Battery cover Protective rubber Hole for strap ① Sensor connector : Connect the dedicated optional probes ②...
- Page 5 ⑥ REL key : Press the REL key to display the relative value (REL). 5. Using the SK-810PT 5-1. Installing the Batteries Install or replace the batteries before using the unit for the first time or when the low battery indicator is flashing, by following the procedure below.
- Page 6 5-2. Installing a Vinyl Cover for the Unit The SK-810PT comes with a vinyl cover to keep the unit clean and protect it from damage if dropped. (1) Open the mouth of the cover and place the unit inside so that the sides of the vinyl cover having a slit is over the back of the unit.
- Page 7 Caution ● Take care not to get burned when measuring high temperatures. ● Measuring low temperatures immediately after measuring high temperatures (or vice versa) can quickly wear out the sensor. Leave the unit in a room-temperature environment for a while before performing such operation.
- Page 8 ● Setting the measurement count (1) Press and hold the AVG key for at least two seconds. The AVG indicator lights up and the measurement count starts flashing. (2) Every time the AVG key is pressed, the measurement count changes. (3) Press the HOLD/ENTER key when the desired count is displayed.
-
Page 9: Troubleshooting
6-6. Low Battery Warning Function The low battery indicator starts flashing when the battery power becomes low. If this occurs, immediately replace the batteries with new ones. Not doing so can affect the measurement accuracy or cause a malfunction 7. Error Message If a problem is detected in the unit, an error code appears on the display. - Page 10 10. Optional Items Products Cat. No. Descriptions Optional probes Various probes for SK-810PT are provided. Visit our web-site or contact us or the shop where you purchased the products Dedicated carrying case 8012-90 One main unit and three probes can be stored...
- Page 11 Warranty during transportation The warranty during transportation only applies to the products that we arrange the shipment. The case that the products had been purchased in domestic and were sent to overseas by the purchaser is out of warranty. Return of items Authorization must be obtained from us before returning items for any reason.
- Page 12 3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 JAPAN TEL: +81 (0)3-3254-8117 FAX: +81 (0)3-3254-8123 URL: http://www.sksato.co.jp/english/...
Need help?
Do you have a question about the SK-810PT and is the answer not in the manual?
Questions and answers