Subscribe to Our Youtube Channel
Related Manuals for SATO SK-8920
Summary of Contents for SATO SK-8920
- Page 1 Instruction Manual No.8264-00 Infrared Thermometer Model SK-8920 3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan URL: http://www.sksato.co.jp/english/...
- Page 3 WARNING Beware of explosion! The SK-8920 is not explosion-proof. Never use it in an atmosphere containing flammable gases. Do not look into the laser marker or point it at anybody's eyes. Doing so may damage your eyes. Keep the unit out of reach of children.
- Page 4 Overview The SK-8920 is a non-contact type infrared thermometer, which detects the infrared energy emitted from an object and converts it into a temperature reading. The product can measure the temperature of the surface instantly without touching the object.
- Page 5 Features Measures surface temperature instantly: The advantage of the non-contact infrared method is quick-response measurement, and the single-hand-held unit allows easy operation by using trigger type measurement button. Non-contact, clean measurement: Ideal for food processing industries where clean and hygienic measurement is required. ...
- Page 6 1. Names and Functions of Components 1-1. Main unit (1) Temperature measurement (infrared radiation sensing) section : Detects the infrared energy emitted from the object. (2) Laser sighting section : Pressing the measurement key and the laser marker key simultaneously activates laser sighting.
- Page 7 2. Loading the Battery When using the unit for the first time or when the low battery mark lights up, replace the battery with a new one as described below. (1) Open the battery lid. (2) Check both polarities (+/-) of the battery snap fasteners and a 9V battery 6F22 (006P).
- Page 8 4. How to Measure (1) Remove the lens cap. (2) Prior to measurement, set the laser marker and emissivity. (3) Direct the thermometer at an object and pull the trigger. Then, the measured temperature is displayed on the LCD. NB.: Infrared rays in this measurement wavelength range do not penetrate glasses. When measuring the object through the glass, it detects the surface temperature of the glass.
- Page 9 4-2. High-Temperature Measurement Operating the thermometer continuously to measure a high-temperature (200ºC or more) object at a short distance (30 mm or less) for a long time (three minutes or more) may cause a drop in the performance of the infrared lens. When measuring a hot object of 200ºC or more, the distance should be 30 mm or more and operation should be completed within a short time.
-
Page 10: Maintenance
6. Setting the Laser Marker While pulling the trigger, press the laser marker レーザ key simultaneously to set the laser marker on or off. While the laser marker レーザ key is ON, the laser marker can be output. While the laser marker key is OFF the laser marker is not output. -
Page 11: Error Message
～ 9. Specifications Cat. No. 8264-00 Name Infrared Thermometer Model SK-8920 Measuring range -40 ºC to 250 ºC Accuracy -40 ºC to -20 ºC : ± 3 ºC (at 23 ºC ± 5 ºC) -19.9 ºC to 250 ºC : ± 2 ºC (Calibrated by Black body emissivity at 0.95)
Need help?
Do you have a question about the SK-8920 and is the answer not in the manual?
Questions and answers