Advertisement
Additional Host Ports
Drawer 1
Additional host port
Install the re-timer card to the
upper-left bracket for drawer 1. (1:H2)
To open the top lid:
1. Press and hold both buttons on the lid
2. Push the lid toward back
Please install the re-timer card to the riser slot for additional host
port(s)
This host port will be recognized as 1:H2 or 2:H2 on GUI.
Make sure that the port(s) is configured into host mode before installing
the re-timer card. See Falcon-4010 User Manual- Port Configuration for
details
Note:
H3 re-timer card only supports 1x16 configuration now. Bifurcation
function coming soon.
10
Drawer 2
Additional host port
Installed the re-timer card to the
upper-right bracket for drawer 2 (2:H2)
Advertisement
