Advertisement
Additional Host Ports
To open the top cover:
1. Press and hold both buttons on the lid
2. Push the lid toward back
Please install the re-timer card to the riser slot for additional host port(s).
This host port will be recognized as 1:H2
Make sure that the port 1:H2 is configured into host mode before installing
the re-timer card. See Falcon-4005 User Manual- Port Configuration (8.2.3)
for details.
Note:
H3 re-timer card only supports 1x16 configuration now. Bifurcation
function coming soon.
10
The riser slot is dual width, make sure you install
the re-timer card to the left bracket. (immediately
next to the host ports)
Correct installation should be as illustrated. The
bracket on the right should be empty.
Advertisement
