To Start/Stop Recording In Sync With The Sound Source (Synchro-Recording) - Sony Walkman MZ-RH710 Operating Instructions Manual

To start/stop recording
in sync with the sound
source
(Synchro-recording)
When making a digital recording (e.g.,
from a CD), this function automatically
starts and stops the recorder in
synchronization with the sound source.
This eliminates the need for separate
operation of the recorder and the sound
source.
5-way control key (NENT)
MENU
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. For details,
see "Optional accessories" (page 67).
2
While the recorder is stopped, enter
the menu and select "REC Set" -
"SYNC REC" - "SYNC On".
z
When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
34
Notes
•
The pause function cannot be turned on or off
manually during synchro-recording.
•
Do not switch the "SYNC REC
recording. Recording may not be done
properly.
•
Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
•
If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
Jog dial
"
setting while