Sony Walkman MZ-RH710 Operating Instructions Manual page 13

How to use the supplied clamp filters
When using the recorder connected to the computer, make sure to attach the clamp filters in
the way described. (You must attach a clamp filter to comply with the applicable EMC
standards.) It is unnecessary to attach the clamp filters if you use the unit without
connecting it to the computer.
For the optional AC power adaptor (AC-ES3010K/AC-E30HG): small-
•
size clamp filter/ESD-SR-110
(except Mexico model)
• For the optional line cable (RK-G129/RK-G136): small-size clamp filter/
ESD-SR-110
(except Mexcio model).
1
Open the clamp filters.
2
Attach the clamp filters as follows.
For the optional AC power adaptor: Wind the cord around the clamp filter once/
Approx. 4cm (1.6 in.) from the plug and body (see graphic 2-a above).
For the optional line cable: Pass the cord through the clamp filter/Next to the plug
connected to the recorder and approx. 4cm (1.6 in.) from the plug connected to an
external component (see graphic 2-b above).
3
Close the clamp filter. Make sure the clasps are fully engaged.
Approx. 4cm
(1.6 in)
Approx.
4cm (1.6 in)
Approx. 4cm (1.6 in)
To LINE IN
(OPTICAL)
CD player,
MD player,
DVD video
player, etc.
To a digital
(optical)
out jack
13