Camera Overview Lens Microphone OLED screen Battery hatch buckle LED indicator Speaker Standard 1/4'' bolt Shutter / Enter key Power / Switch key Micro USB interface LED indicator Microphone Micro SD card slot...
Page 3
Before using the camera, please release the battery hatch buckle, open the battery hatch and insert the included lithium battery. Note: It is suggested to use the power adapter of 5V/2A to charge the camera. You can also use Insta360 ONE X's officially recommended charger (sold separately) to charge the camera.
Page 4
❷ Before using the camera, please insert an Micro SD card (sold separately). Note: 1) This camera supports Micro SD card with UHS-3 or V30 (or above) format. As for the memory, up to 128GB can be supported. 2) For long time recording, a video will automatically be stored in several separate files.
Page 5
When the camera is on, press Key 2 to switch the camera mode to video mode and then press Key 1 to start shooting videos. While shooting a video, press Key 1 to stop the recording. * More features of the camera will be updated, and you can visit https://www.insta360.com/r/onexdetail .
Page 6
Wireless Connection ❶ Press Key 1 (the smaller key) to power on the camera. ❷ Scan the QR code as shown on the right or search "Insta360 ONE X" in App Store to download the companion app. ❸ Wireless 9 41 Having successfully installed the app, tap the 本地...
Page 7
❹ Having successfully connected to the camera, you can take photos or shoot videos via the app. Back Remaining battery Video 360° live Animation live Photo Album Settings Shutter Filter Note: Only when in wired connection, will the 360° live and animation live be enabled.
Wired Connection We provide different connection cables according to different connecting interfaces. Once your phone is connected to the camera via the compatible cable, you can open the app and tap the Shutter button to take photos. With wired connection, you can also broadcast 360° live or animation live. Connect to iPhone Connect to Android smart phone...
Page 9
Bluetooth Wakeup When you let your camera stay inactive for an extended long period, it will enter the standby mode. Press any key of the camera to exit the standby mode. You can also configure Bluetooth settings in the app to wake up the camera.
Page 10
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changers or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 11
Note:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide resasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that...
Page 12
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. 5.15-5.25GHz Band Operation is the 5.15-5.25GHz band are restricted to indoor use only.
Page 13
IO-XQS-CM.1 Shenzhen Arashi Vision Company Limited ADD: 6F, Building A, Logan Century Center, 23 Haixiu Road, Bao'an District, Shenzhen, Guangdong, China WEB: www.insta360.com TEL: (+86) 400-833-4360 EMAIL: service@insta360.com...
Need help?
Do you have a question about the ONE X and is the answer not in the manual?
Questions and answers