Canon LV-5220 Owner's Manual page 40

Video Input
Progressive
Interlaced video signal can be displayed in a progressive picture.
Off . . . .Not activated.
L1 . . . . .Select "L1" for an active picture.
L2 . . . . .Select "L2" for a still picture.
Film
This function is effective on 3:2 pulldown video sources. With this
function On, the projector reproduces pictures faithful to the
original film quality.
Reset
Resets all adjustment to their previous figure.
Store
To store the adjustment data, move the red frame pointer to the
Store icon and press the SET button. The message "OK?" will
appear. Select [Yes] to store the adjustment data.
To select this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p38).
Quit
Closes the Image Adjust Menu.
Note:
• Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is
selected. (p37)
• Film can only be activated when selecting NTSC for Video System and L1/ L2 for
Progressive.
• 3:2 Pulldown or Telecine transfer is the process of changing images from film mode
to video mode. While film runs at 24 frames per second (fps), NTSC television
signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded
up to 30fps and transferred using a proper field pattern to get the best film-like
images.
40
"OK?" message
Move the pointer to [Yes]
and then press the SET
button.
Store icon