New Holland T6.140 Service Manual page 79

34. Remove the air filter mounting frame left-hand rear
mounting bolts and wiring loom clamp.
NOTE: Repeat this step for the right-hand side of the vehi-
cle.
35. Disconnect the vacuum sensor electrical connectors
and remove the turbocharger intake tube.
36. Disconnect the coolant hose.
NOTE: Install blanking plugs/caps to all openings to pre-
vent dirt ingress.
37. Detach the wiring loom from the left-hand air filter
frame upright
Engine - Engine and crankcase
47665870 27/03/2014
10.1 [10.001] / 47
34
BAIL07APH123AVA
35
BAIL07APH232AVB
36
BAIL07APH125AVA
37
BAIL07APH128AVA