New Holland T6.140 Service Manual page 61

Vehicles with SuperSteer™ front axle
Install the four-wheel drive shaft rear retaining nuts.
Tighten to 65 - 86 Nm ( 48 - 63 lbft).
Install the four-wheel drive shaft front retaining nuts.
Tighten to 65 - 86 Nm ( 48 - 63 lbft).
Install the four-wheel drive shaft guard.
Install the four-wheel drive shaft guard retaining bolts.
NOTE: Repeat this step on both sides of the vehicle.
Engine - Engine and crankcase
47665870 27/03/2014
10.1 [10.001] / 29
13
BAIS06CCM035AVA
14
BAIS06CCM034AVA
15
BAIS06CCM033AVA