6. INSTALLATION
Use the ▼▲ buttons on the remote control to make a selection. Use the
ENTER button on the remote control or press the dial on the device to
confirm.
6.7. Daylight saving
Switch on daylight saving time here if it currently applies.
Use the ▼▲ buttons on the remote control to make a selection. Use the
ENTER button on the remote control or press the dial on the device to
confirm.
6.8. Standby mode
Here, define whether the time should be displayed when the radio is in
standby mode.
Use the ▼▲ buttons on the remote control to make a selection.
Use the ENTER button on the remote control or on the device to confirm or
82
EN