Table of Contents
Advertisement
■
Turn off the product and disconnect from the mains
before conducting any maintenance or cleaning work.
■
You may make adjustments and repairs described in
this manual. For other repairs, contact the authorised
service agent.
■
For the replacement line, use only nylon filament line
of the diameter described in the specification table of
this manual.
■
After extending the new cutter line, always return the
product to its normal operating position before starting.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired
or replaced by an authorised service centre.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in a safe
working condition.
■
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■
injury caused by vibration
–
Hold the product by designated handles and restrict
working time and exposure.
■
injury caused by exposure to noise
–
Wear hearing protection and limit exposure.
■
injury caused by flying debris
–
Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute
to the development of the these symptoms. There are
measures that can be taken by the operator to possibly
reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 109.
1.
On/Off trigger
2.
Rear handle
3.
Cord hook
4.
Power cord
5.
Spool storage
6.
Upper shaft
7.
Spool cover
8.
Spool
9.
Cutting head
10. Edging wheel
11. Safety guard
12. Cutting line
13. Metal fl ower protector
14. Cut-off blade
15. Cutting head pivoting release button
16. Cord storage hook
17. Lower shaft
18. Tube telescopic release latch
19. Front handle rotating release button
20. Front handle
21. Edging button
SYMBOLS ON THE PRODUCT
Autogoods "130"
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
Wear non-slip, heavy-duty gloves.
Wear non-slip, safety footwear when
using the product.
Do not use metal blade(s) on the
product.
Do not expose to rain or damp condition.
Remove plug from the mains
immediately before maintenance or if
cable is damaged or cut
English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
3
Advertisement
Table of Contents
