Switching On The Power And Starting The Commissioning Sequence; Selecting The Language; Setting The Date; Setting The Time - Viessmann Vitoligno 200-S Installation And Service Instructions Manual

Switching on the power and starting the commissioning sequence

After switching the power on, a commissioning
sequence commences. If it does not start automati-
cally, press and simultaneously and hold for
Ù Ú
approx. 5 seconds.

Selecting the language

Shortly after switching the power on, the display shows
"Select language".
Press the following keys:
1. / for the required language.
| ~

Setting the date

Press the following keys:
1. / for the required date.
| ~

Setting the time

Press the following keys:
1. / for the required time.
| ~

Selecting the number of buffer temperature sensors

Press the following keys:
1. / for buffer temperature sensor "3", "4" or "5"
| ~

Selecting the type of heating water buffer cylinder

If the test point for capturing the system temperature is
to be selected, press the following keys:
1. / for buffer type.
| ~
Commissioning, inspection, maintenance
While making the following inputs, these keys may
also be pressed:
to go back one step
ä
to display the commissioning menu structure
å
2. to confirm.
d
The display shows "Date setting".
2. to confirm.
d
The display shows "Time setting".
2. to confirm.
d
2. to confirm.
d
2. to confirm.
d
27