10. Unscrew the front central and rear retaining bolts
on the front axle shaft guard, then remove the
guard (1).
11. Remove the circlip (2) and move the front sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the front axle.
12. Remove the circlip (2) and move the rear sleeve
(1) in the direction indicated by the arrow until it
is released from the groove on the drive.
13. Remove the propeller shaft central support (1)
retaining bolts and extract the shaft together with
the support.
SECTION 10 - ENGINE - CHAPTER 1
25038
1 2
25039
1
2
25040
25041
9
1
8
9
10
1
11
84176561
- 03-2008