Operating Mode; Power Level - pagertec Matrix Stand Alone Manual

Press "Cancel" key to exit, and return to the main menu.
(note: our default transmitter frequency is 457.575)
Group ID
This option is to Select the Group ID of the Pagers and It will allow you to Page Groups at the
same time.

Operating Mode:

This option can change the Operating mode of the Transmitter.
Default:​ Pagertec

Power Level:

This option allows you to change the power output level. The output level gives different ranges
to the transmitter. To Chose an Option Press "Enter" and select desired Output Power by Using
the "*" or "#" buttons on the transmitter then Press "Enter".
Options:​ .10 Watts, .25 Watts, .50 Watts, 1 Watt, 2 Watts,
Range ID:
This option allows you to change the code for Range Testing.
Default:​ 9 997
Range Signal:
This option allows you to turn on the "Out of Range" Setting on the Transmitter.
Default:​ Off