Table of Contents
Advertisement
Chapter 1 Assembly and installation guidelines
Installation CPU
with Standard-Bus-
Modules
CPU
SLOT2
SLOT1
DCDC
Installation
Standard-Bus-
Modules
CPU
SLOT2
SLOT1
DCDC
Danger!
• Before installing or overhauling the System 300V, the power supplies
• Installation and modifications only by properly trained personnel!
1-6
All manuals and user guides at all-guides.com
• If also standard modules shall be plugged, take a
bus coupler and click it at the CPU from behind
like shown in the picture.
• Plug the CPU between the triangular positioning
helps to the plug-in location marked with "CPU
SPEED7" and pull it down.
• Fix the CPU by screwing.
• Repeat
modules, by clicking a backplane bus coupler,
stick the module right from the modules you've
already fixed, click it downwards and connect it
with the backplane bus coupler of the last module
and bolt it.
must be disconnected from voltage (pull the plug or remove the fuse)!
Manual VIPA System 300S SPEED7
this
procedure with the peripheral
HB140E - PS - RE_307-1FB70 - Rev. 13/43
Advertisement
Table of Contents
