Table of Contents
Advertisement
Chapter 1 Assembly and installation guidelines
Overview
General
Depending upon the CPU type besides the serial standard bus there is
additionally a parallel SPEED-Bus integrated to the CPU. There up to 10
modules of the SPEED-Bus periphery may be connected.
While the standard peripheral modules are plugged-in at the right side of
the CPU, the SPEED-Bus peripheral modules are connected via a SPEED-
Bus bus connector at the left side of the CPU.
VIPA delivers profile rails with integrated SPEED-Bus for 2, 6, or 10
SPEED-Bus peripheral modules with different lengths.
Serial
The single modules are directly installed on a profile rail and connected via
the backplane bus connector. Before installing the modules you have to
Standard bus
clip the backplane bus connector to the module from the backside.
A backplane bus connector is scope of delivery of a peripheral module.
Parallel
With SPEED-Bus the bus connection happens via a SPEED-Bus rail
integrated in the profile rail at the left side of the CPU. Due to the parallel
SPEED-Bus
SPEED-Bus not all slots must be occupied in sequence.
SLOT 1 for
At SLOT 1 DCDC you may plug either a SPEED-Bus module or the
Co Power Supply
Co Power Supply PS 307S_Co - exclusively with deployment of the
PS 307S_Co
CPU 317S.
You may assemble the System 300 horizontally, vertically or lying.
Assembly
possibilities
horizontal assembly
CPU
SLOT2
SLOT1
DCDC
lying assembly
1-2
All manuals and user guides at all-guides.com
SPEED-Bus (parallel)
vertical
Please regard the allowed environment tempera-
assembly
tures:
• horizontal assembly:
• vertical assembly:
• lying assembly:
Manual VIPA System 300S SPEED7
Standard bus (serial)
from 0 to 60°C
from 0 to 40°C
from 0 to 40°C
HB140E - PS - RE_307-1FB70 - Rev. 13/43
Advertisement
Table of Contents
