Formatting Memory (Format) - Sony Walkman NWD-E023F Operation Manual

Hide thumbs Also See for Walkman NWD-E023F:
Table of Contents

Advertisement



Settings
Formatting Memory
You can format the built-in flash memory of the player.
If the built-in flash memory is formatted, all audio data, the "Auto Transfer"
software and Operation Guide (this manual) will be erased. Be sure to verify
the data stored in the memory prior to formatting, and export any necessary
data to the hard disk of your computer or other device.
Notes
 This function is only available in pause mode.
 When the remaining battery is low, you cannot format the player. Charge the battery
before formatting.
 This function is not available while/after using FM radio. If you want to use this function
after FM radio, operate from the HOME menu to select
Shuffle) to confirm.
 If you format the built-in flash memory of the player, data in the "MUSIC" folder is
erased, but the "MUSIC" folder is left on the player.
Press and hold the
menu appears.
Press the / button to select
the  button to confirm.
Press the / button to select "Advanced Settings>," and then
press the  button to confirm.
Press the / button to select "Initialize>," and then press the
 button to confirm.
Press the / button to select "Format>," and then press the
 button to confirm.
Press the / button to select "OK," and then press the 
button to confirm.
"FORMATTING... " appears and formatting starts.
When formatting is completed, "COMPLETE" appears.
(Format)
 button
/HOME button
/ button
/HOME button in pause mode until the HOME
(All Songs) or
(Settings), and then press
(Sports
Continued 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Walkman nwd-e025f

Table of Contents