High Pressure Leaks - MASSEY FERGUSON MF 9226 Service Manual

crop material and unwanted material from around
the area. Make sure that the area below the work
area is clear of flammable material because falling
molten metal and sparks can cause ignition in the
material.
If fire occurs, move upwind and away from the
smoke from the fire.

1.4.3 High pressure leaks

Fluid that leaks from the hydraulic system or the
fuel injection system is high pressure and is not
easily seen. The fluid can go into the skin causing
injury.
Fluid that is injected into the skin must be
surgically removed immediately. If not removed
immediately, infection and reaction can occur. Go
immediately to a physician who knows about this
type of injury.
Use a piece of cardboard or wood to look for
possible leaks. Do not use your bare hand. Wear
leather gloves for hand protection and safety
goggles for eye protection.
Remove all pressure before you loosen hydraulic
lines. Lower equipment in the up position, close
the accumulator valve, and stop the engine.
Tighten all connections before applying pressure.
Auger Header
4283613M1
Fig. 21
Fig. 22
Fig. 23
1. General
GUID-8FDCA67C-244A-40BA-967B-3FA4E7667A7E-high.jpg [High]
GUID-68111A90-0641-4B8F-9AB9-A5B05A044C46 [V3]
GUID-CB450E2E-50DF-4D16-9E59-21C0B3E5B026-high.jpg [High]
GUID-9A83C5CD-95EC-445B-A3A7-1DCF8FACFE45-high.jpg [High]
1-15