Table of Contents
Advertisement
1. General
Remove spilled oil, antifreeze or fuel immediately
from the steps, platform, and other access areas.
Keep all access areas clean of unwanted materials.
When you do work on the machine, make sure
that the header is lowered.
When it is necessary for the header to be in the up
position, lift the header to the full up position, stop
the engine, and take the key with you.
The header down valve on the windrower lift
cylinder keeps the header from lowering.
1.4.2 Fire prevention and first aid
Be prepared for emergencies.
Keep a first aid kit available for use on small cuts
and scratches.
Keep one or more fire extinguishers of the correct
type. Examine fire extinguishers regularly as
stated by the manufacturer. Make sure that the
fire extinguishers are charged and in operating
condition.
Crop material is flammable, there is a risk of fire.
Use a water type fire extinguisher or other water
source for a fire in crop.
For fires in material other than crop, such as oil or
electrical components, use a dry chemical fire
extinguisher with an ABC rating.
Keep fire extinguishers easy to access where fires
can occur.
Frequently remove crop material from the machine
and examine for components that are too hot. Do
checks on the machine each day for noises that
are not usual. Unusual noises can indicate a worn
out component that can cause too much heat.
If flame cutting, welding, arc welding, or grinding
is to be done on the machine or attachments, clear
1-14
Fig. 18
Fig. 19
Fig. 20
GUID-3B306DB1-0777-4FA6-86F1-895652B4C1DB-high.jpg [High]
GUID-353ABA0B-44F7-4320-8E22-3E3CA612BD91-high.jpg [High]
GUID-9D716526-CF1A-4CD9-89A6-FD350D1B1E7A [V7]
GUID-FF34ACC9-D080-4CD5-9528-F426605803FF-high.jpg [High]
Auger Header
4283613M1
Advertisement
Table of Contents
