Table of Contents
Advertisement
1.4 Maintenance
1.4.1 General maintenance information
Before you do maintenance, lubricate, do
servicing, clean, or make adjustments:
• Park the machine on a solid, level surface.
• Make sure that all the controls are in the
neutral position and apply the parking brake.
• Make sure that the machine and the
attachments are lowered to the ground.
• Stop the engine and take the key with you.
• Look and Listen! Make sure that all parts that
move are stopped.
• Put chocks in front of and behind the wheels of
the machine before you do work on or below
the machine.
After you do work on the machine, remove all tools from the machine.
Make sure that electrical connectors are clean before you connect them.
Do a check for loose, broken, missing, or damaged parts. Make sure that the machine is in good repair.
Make sure that all guards and shields are in position.
Do not do the servicing, examine or adjust chains
or belts while the engine is in operation.
Do not operate the machine with the drive shaft
shields open or removed. Entanglement in drive
shafts that turn can cause injury or death.
Stay clear of components that turn.
Make sure that guards that turn can turn freely.
A loose yoke can come off a shaft and result in
injury to persons or damage to the machine.
When you install a quick disconnect yoke, the
spring activated locking pins must move freely and
be in the groove on the shaft. Pull on the driveline
to make sure that the quick disconnect yoke can
not be pulled off the shaft.
Auger Header
4283613M1
Fig. 15
Fig. 16
Fig. 17
1. General
[V]
GUID-93C8628D-B392-4191-80DB-7D54BDAAF61B [V15]
GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
GUID-7D1C9640-D737-4F38-8886-F1D2280DF613-high.jpg [High]
GUID-CEB32148-1F4C-457C-ADF7-595DFC51AC25-high.jpg [High]
1-13
Advertisement
Table of Contents
