Checking For High Pressure Leaks; Engine Safety - MASSEY FERGUSON MF 9500 Series Operator's Manual

Checking for High Pressure Leaks

FIG. 27: Fluid leaking from the hydraulic system or the
fuel injection system under high pressure can be very
hard to see. The fluid can go into the skin causing serious
injury.
Fluid injected into the skin must be surgically removed
within a few hours. If not removed immediately, serious
infection or reaction can develop. Go immediately to a
doctor who knows about this type of injury.
FIG. 28: Use a piece of cardboard or wood to search for
possible leaks. Do not use your bare hand. Wear leather
gloves for hand protection and safety goggles for eye
protection.
Relieve all pressure before loosening any hydraulic lines.
Relieve the pressure by lowering raised equipment,
shutting off accumulator valve, if equipped, and shutting
off the engine. Tighten all connections securely before
applying pressure.

Engine Safety

m
CAUTION: See
Manual for other important engine safety
information.
FIG. 29: Make sure all shields, guards and access doors
are in place and properly closed before starting the
engine.
Start the engine from the operator's seat only. Make sure
all controls are in neutral and drives are disengaged.
Make sure all bystanders are clear of the machine before
starting the engine.
Do not bypass the neutral start system. The neutral start
system is designed to prevent starting the machine in
gear. Any manual override of this system can cause death
or serious injury.
Never connect booster cables to the starter terminals or
short across the starter terminals.
700744638 A Rev.
the engine Instruction
FIG. 27
FIG. 28
FIG. 29
SAFETY
WC1938
D-5842A
Wc1955
A-15