A Word To The Technician - MASSEY FERGUSON MF 9226 Service Manual

1. General
Always make sure that safety signs are in the correct locations and that you can read the safety signs.
Illustrations of safety sign locations are at in this section.
Keep the safety signs clean. If necessary, use a weak soap and water solution.

1.2.5 A word to the technician

Read and understand the safety section in this
service manual before operating or servicing the
machine. Read and understand the safety sections
in the manuals for all attachments before
operating or servicing attachments. The technician
has the key to safety. Good safety practices
protect everyone.
Study the safety information in this service
manual. Make the safety information a working
part of the safety program. The safety information
in this service manual applies specifically to this
type of machine. Always do all other usual and
customary safe working precautions. Remember -
The technician has the responsibility for safety.
Good safety practices can prevent serious injury or
death.
The safety section points out some basic safety
situations that can occur during the operation and
maintenance of the machine. The safety section
also suggests possible ways to deal with these
situations. The safety section does not replace
safety practices in other parts of this service
manual.
Practice good safety to help prevent injury or
death.
Learn how to operate the machine and how to use
the controls correctly.
Do not let other persons operate the machine
without instruction and training.
Follow all safety precautions and instructions in
the manuals and on safety signs affixed to the
machine and all attachments.
Use only approved attachments and equipment.
Make sure the machine has the correct equipment
needed by the local regulations.
WARNING:
An operator should not use alcohol or
drugs which can affect their alertness
or coordination. An operator on
prescription or 'over the counter'
drugs needs medical advice on
whether or not they can properly
operate machines. If any attachments
used on this equipment have a
separate Operator Manual, see that
manual for other important safety
information.
1-6
Fig. 3
GUID-3C35D58D-1F5D-4B85-A915-C7BB48F47262 [V1]
GUID-AC91CCF6-1FF8-4A85-97A1-2D1562806825-high.jpg [High]
Auger Header
4283613M1