Table of Contents
Advertisement
SAFETY
PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
USE HANDRAILS AND STEPS WHEN GETTING ON OR OFF MACHINE
To prevent personal injury caused by slipping or falling off the machine, always observe the following.
•
Use the handrails and steps marked by arrows in the fig-
ure on the right when getting on and off the machine.
•
Always face the machine and maintain at least three-point
contact (both feet and one hand, or both hands and one
foot) with the handrails and steps to ensure that you sup-
port yourself.
•
Before getting on and off the machine, check the handrails
and steps if there is any oil, grease, or mud on them. Wipe
it off immediately not to slip if any. In addition, tighten any
loose bolt of the handrails and steps.
If the handrails and steps are damaged or deformed, they
need to be repaired immediately. Ask your Komatsu dis-
tributor to perform this work.
•
Do not grip the control levers or lock lever when getting on or off the machine.
•
Never climb on the engine hood or covers where there are no non-slip pads.
•
Do not get on or off the machine with tools in your hand.
•
Do not grab a foldable mirror as a handrail since it turns.
NO JUMPING ON OR OFF MACHINE
Getting on or off the moving machine can cause serious personal injury or death. Always observe the following.
•
Never jump on or off the machine. Never get on or off a moving machine.
•
If the machine starts to move when there is no operator on the machine, do not jump on to the machine and
try to stop it.
NO PEOPLE ON ATTACHMENTS
Never let anyone ride on the work equipment or other attachments. There is a hazard of falling and suffering
serious personal injury or death.
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
2-19
Advertisement
Chapters
Table of Contents
