Advice Regarding The First Wash Cycle; Technical Data - Hotpoint Ariston LTF 8B019 Operating Instructions Manual

*
Anti-condensation strip
After installing the dishwasher, open the door and stick the
adhesive transparent strip under the wooden shelf in order
to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and
the retaining elastic elements from the upper rack, if any.
Immediately before the first washing, completely fill the salt
The water may overflow: this is normal and is not a cause
for concern. Select the water hardness value (see chapter
switches off.
If the salt container is not filled, the water softener and
the heating element may be damaged as a result.

Technical data

Dimensions
Capacity
Water supply
pressure
Power supply voltage See appliance data plate
Total absorbed power See appliance data plate
Fuse See appliance data plate
The machine has a buzzer/set of tones
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
(depending on the dishwasher model)
light
The display provides useful information concerning the type
of wash cycle, drying/wash-cycle phase, remaining time,
temperature etc etc.
Assistance
Before contacting Assistance:
Troubleshooting guide (see Troubleshooting).
has ceased to exist.
Technical Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
This information can be found on the appliance data plate
(see Description of the appliance) .
*
Only available in selected models.
(depending on the
EN
.
19