Table of Contents
Advertisement
456
5-5. Using the other interior features
Codes stored in the HomeLink
■
The registered codes are not erased even if the battery cable is disconnected.
●
If learning failed when registering a different code to a HomeLink
●
has a code registered to it, the already registered code will not be erased.
Before programming
■
Install a new battery in the transmitter.
●
The battery side of the transmitter must be pointed away from the HomeLink
●
WARNING
When programming a garage door or other remote control device
■
The garage door or other device may operate, so ensure people and objects are out of
danger to prevent potential harm.
Conforming to federal safety standards
■
Do not use the HomeLink
device that lacks safety stop and reverse features as required by federal safety stan-
dards.
This includes any garage door that cannot detect an interfering object. A door or
device without these features increases the risk of death or serious injury.
When operating or programming HomeLink
■
Never allow a child to operate or play with the HomeLink
®
memory
®
compatible transceiver with any garage door opener or
®
®
button that already
®
buttons.
®
.
Advertisement
Table of Contents
