Table of Contents
Advertisement
Programming a rolling code system
■
2 or more people may be necessary to complete rolling code programming.
Locate the "Learn" or "Smart"
1
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by man-
ufacturer. Refer to the owner's man-
ual supplied with the garage door
opener motor for details.
Press and release the "Learn" or
2
"Smart" button.
Perform
3
after performing
Press and hold the desired
3
®
HomeLink
vehicle) for 2 seconds and
release it. Repeat this sequence
(press/hold/release) up to 3
times to complete programming.
If the garage door opener motor
operates when the HomeLink
button is pressed, the garage
door opener motor recognizes
the HomeLink
5-5. Using the other interior features
within 30 seconds
.
2
button (inside the
®
®
signal.
453
5
Advertisement
Table of Contents
