Before programming HomeLink
■
During programming, it is possible that garage doors, gates, or other
●
devices may operate. For this reason, make sure that people and objects
are clear of the garage door or other devices to prevent injury or other
potential harm.
It is recommended that a new battery be placed in the remote control
●
transmitter for more accurate programming.
Garage door opener motors manufactured after 1995 may be equipped
●
with rolling code protection. If this is the case, you may need a stepladder
or other sturdy, safe device to reach the "Learn" or "Smart" button on the
garage door opener motor.
Programming the HomeLink
■
Steps
through
1
indicator light will stop flashing and programming will not be able to be com-
pleted.
Press and release the HomeLink
1
that the HomeLink
Point the remote control transmit-
2
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
in view while programming.
5-5. Using the other interior features
®
®
must be performed within 60 seconds, otherwise the
3
®
button you want to program and check
®
indicator light flashes (orange).
®
buttons.
®
indicator light
451
5