Sound Adjustment; Selecting The Sound Quality - Eq7; Customizing The Equalizer Curve - Eq7 Tune; Adjusting The Sound Characteristics - Sony XAV-70BT Operating Instructions Manual

Sound Adjustment

Selecting the sound quality
— EQ7
You can select an equalizer curve from 7 music
types ("Xplod," "Vocal," "Edge," "Cruise,"
"Space," "Gravity," "Custom" or "OFF").
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "EQ7."
The options appear.
4
Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select "OFF."
To return to the previous display, touch "Back."
Customizing the equalizer curve
— EQ7 Tune
"Custom" of EQ7 allows you to make your own
equalizer settings. You can adjust the level of 7
different bands: 62 Hz, 157 Hz, 396 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, and 16 kHz.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound," then "EQ7."
3
Touch "Custom," then "Tune."
The tuning display appears.
Back ATT
EQ7 Tune : Custom
0 0
62 Hz 157 Hz 396 Hz
Reset
15
4
Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch "Reset."
5
Touch "OK."
The setting is complete.
To return to the previous display, touch "Back."
48
.
.
Top
0 0 0 0 0
1 kHz 2.5 kHz 6.3 kHz 16 kHz
OK
12:00
Tip
Other equalizer types are also adjustable.
Adjusting the sound
characteristics
The sound balance between left and right
speakers ("Balance") and front and rear speakers
("Fader") can be adjusted to your preference.
You can also adjust the volume level of
subwoofer if it is connected.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "Balance/Fader."
The setting display appears.
Back ATT
Balance/Fader/Subwoofer Level Adjust
15
4
Touch B/V/v/b to adjust the balance/
fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).
5
Touch +/– to adjust the volume level of
subwoofer.
This setting is adjustable only when
subwoofer is connected and "Subwoofer" is
set to "ON" (page 56).
The level is adjustable in single steps,
between –6 and +6.
To return to the previous display, touch "Back."
.
Top
Subwoofer : 0
Fader : 0
Balance : 0
12:00