Reception Controls - Sony XAV-70BT Operating Instructions Manual

Reception controls

Touch the display if the reception controls are not shown.
No. Item
"Source List"
1
"ATT"
2
"TA"
3
"AF"
4
"Top"
5
m/M
6
./>
7
"Band"
8
"Receive Menu"
9
"Preset List"
0
"PTY List"
qa
Indications during reception
A B
Source List ATT
15
C
18
1
Source List
15
6
Touch to
open the source list. (page 13)
attenuate the sound. To cancel, touch again.
set TA in RDS. (page 24)
set AF in RDS. (page 24)
open the top menu. (page 13)
tune manually.
Touch and hold to skip frequencies continuously.
tune automatically.
open the band list and change the band.
open the receive menu, which contains the following.
• "Mono": Touch to activate the monaural mode if FM reception
is poor. To restore stereo reception, select "OFF."
• "Local": Touch to only tune into stations with stronger signal.
To tune normal stations, select "OFF."
• "Regional" (page 24)
list up stored stations, or store stations. (page 23)
open the PTY list. (page 24)
TA AF Top
Receive Preset PTY
Band
Menu List List
12:00
D
2 3 4 5
ATT TA AF
Receive Preset
Band
Menu List
7 8 9 0
A Current source icon*
B Band number, Preset number*
C Volume level* 4
D Setting status (CSO, EQ7, RBE)
*1 Appears only when the controls are shown.
*2 Appears only when the station stored in memory is
received.
*3 While receiving an RDS station, program service name
appears. For details, see "RDS" on page 23.
*4 When ATT is activated,
Top
PTY
List
12:00
qa
1
2 , Frequency*
appears.
3 /status