Installing An Ink Tank - Canon SELPHY DS700 Photo Printing Manual

Easy Setup Instructions

Installing an Ink Tank

Caution
• For safety reasons, store an ink tank out of the reach of small children.
• Do not drop or shake an ink tank as this may cause the ink to leak out and stain your
clothes and hands.
6
5
1
2
Ink ports
3
4
5
Lock the print head into place by
lowering the lever.
Press down the lock button until it
clicks.
Do not touch the lock lever once the
print head has been installed.
Take out the ink tank.
Hold the ink tank as shown in the
diagram and remove the protective
cap.
note
• Do not touch the ink port.
• Do not attempt to reattach the protective
cap once it has been removed.
Insert the ink tank slant into the
slot aligning the
mark.
Press the until it clicks into
place.
Close the cover.
note
Wait until the preparatory operation is
complete: it takes about 80 seconds.
mark with the