Canon SELPHY DS700 Photo Printing Manual page 68

Troubleshooting
Message/Error
Error code
* The waste ink absorber absorbs ink used at cleaning.
note
Accompanied by ink tank icon with '?'
Always be sure to reset the ink counter when you replace ink tank.
See "Resetting the Ink Counter" on page 62.
A "?" is displayed next to the Ink counter between the time one ink tank is removed
and the ink counter is reset when the next one is installed. Display of the "?" can be
disabled by changing the settings on Remaining ink level indicator setting.
1 Connect TV to the printer and turn them on.
See "Connect TV to the printer." on page 13.
2 Select Tool Box and then press the OK button.
3 Select Remaining ink level indicator setting and then press the OK button.
The confirmation screen is displayed.
4 Select Off and then press the OK button.
66
Try This
Disconnect the cable from the printer, and then turn the printer off
and unplug the printer from the power supply. After waiting 10
minutes, plug the power cord back in and turn on the printer.
If the same error persists, contact a Canon service representative.
The ink tank level accompanied by the ink tank icon
with the "?" indicates ink tank is not synchronized
with its ink counter.