Preparing The Printer - Canon SELPHY DS700 Photo Printing Manual

Easy Setup Instructions

Preparing the Printer

1
Place the printer on a flat surface.
2
Remove the tape from the printer.
The tape position is subject to change.
3
Plug the power cord into the back of the printer and connect the other
end to a power outlet.
4
Press the POWER button. The printer will initialize.
Warning
• Never attempt to plug the power cord into the power outlet or unplug the power
cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not
place heavy objects on the power cord.
• Never use any power supply other than the standard power supply available in the
country of purchase. Using the incorrect voltage and frequency could cause a fire or
electric shock.
• Always push the plug all the way into the power outlet.
4
*
Important
* During printing, part of the sheet is ejected
from the back of the printer.
Leave at least 8cm (3.1in), clear space at the
back of the printer.