Page 1
4022 Paint Booth Hose Glide Made In USA Frame Straightening Equipment Inc. P a r t s L i s t A 6 - 7’ Glide Rails B 8 - Connector Brackets C 4 - Connector Bracket End Caps with installed nuts &...
Page 2
Connect Three Glide Rails using Connector Insert bolts to connect Rails & Brackets. Brackets making sure that the bolt holes line Tighten bolts securely up on the Glide Rails & Connector Brackets. The connector bracket at the ends of the rails Hold the Glide Rail in place where it will be will only need one bolt.
Page 3
Tighten clamp to hold hose to hook. Be sure Use supplied hose clamps to clamp your not to overtighten and compress hose. air hose to the Roller Hooks. (air hose not included) Your Hose Glide is now ready. Your air hose will need to be connected to your incoming air line. The Hose Glide will keep your air hose off the paint booth floor out of the painters way.