Page 1
Improper or incomplete assembly could result in damage to Universal Stand or injury to user. Auto Body Toolmart Champ Frame Straightening Equipment, Inc. www.autobodytoolmart.com 2 5 4 5 M i l l e n n i u m D r i v e , E l g i n, I L . 6 0 1 2 4 ( 8 0 0 ) 3 8 2 - 1 2 0 0...
Page 2
Insert the 1-A about 6” down the center of the Adjust the chain on both sides of the base to base and tighten the bolt. get the desired length. Insert the 3-A onto the center of the base. Connect each 4-A into both sides of the 3-A and tighten the bolts.
Page 3
Add a 5-A to each side of the 4-A. Insert the 7-A on one of the 4-A’s. Finally, on the 4-A that is not holding the The Universal Parts Stand is ready to be 7-A, attach the 6-A. used. Shown holding two fenders Mounting a Side Mirror Mounting a Spoiler The Universal Parts Stand is capable of holding mirrors, panels, bumpers, door handles, fenders &...
Page 4
Mounting a spoiler Mounting Bolts Mounting a door handle...
Page 5
Auto Body Toolmart Champ Frame Straightening Equipment, Inc. 2 5 4 5 M i l l e n n i u m D r i v e , E l g i n, I L . 6 0 1 2 4 ( 8 0 0 ) 3 8 2 - 1 2 0 0...
Page 6
Insert the 1-M about 6” down the center of the Adjust the chain on both sides of the base to base and tighten the bolt. get the desired length. Insert the 3-M onto the center of the Connect each 4-M into both sides of the 3-M base.
Page 7
On the same side, add part number 7-M. On the opposite side of the 10-M, place one of the small 5-M’s onto the 4-M. The height of the 5-M’s are adjustable. Insert the 8-M and tighten the bolt. On the opposite side, insert the large 5-M followed by a smaller one.
Page 8
The Universal Parts Stand is ready to be Parts are adjustable to hold all types of used. motorcycle parts. Mounting Bolts...